PITCHED ROOF SOLAR MOUNTING SYSTEMS
PARALLEL MOUNTING OR ELEVATED MOUNTING FOR ANY ROOF AND PITCH
There are endless variations for pitched roofs. The sheer number of roof shapes and pitches make it challenging to install a solar panel system. Given the extensive range and dynamic modular structure of Schletter mounting systems, we’re able to place solar panels on nearly any roof pitch. Better yet, we offer them for all of the PV models currently available on the market.
All of our pitched roof solar racking solutions are highly durable, easy to install, and come with impressive load capacities. Our team can even provide structural certificates for a wide variety of roof systems.
NEW: PROLINE
Roof hooks, Module bearing rails, Module clamps & Accessories
INFORMATION
Pro – Roof hooks:
- Aluminum EN AW-6063 T66
- Fixed using 1 x Flat head T40 Torx wood screw
- Ribbing secures hook in position
- Click-in assembly is fast and flexible
- No pressure on the roof tile
- Quick mounting adapter (also Torx T40) comes pre-assembled
- Adjustable height up to 30 mm with Rapid roof hooks
- Fits over tile battens up to 30 mm thick
- Reduced weight
.
Pro – Module clamps:
- One middle and one end clamp to fit module frames between 30 – 47 mm
- Quick and easy installation with Torx T40
- Pre-assembled for quick mounting
- Integrated grounding pin
- Available in black anodised finish
- Optimized packaging
.
Pro – Module bearing rails:
- Aluminum EN AW-6063 T66
- Less material with greater stability
- Standard rail lengths: 3300 mm, 4400 mm, 5500 mm, 6000 mm
.
Pro – Accessories:
- ProConnector – self locking slide-in connector
- RapidPro L Adapter for EcoA
- Universal plastic end cap
- Spacer 2.5 / 5 mm
DOWNLOADS
ROOF-PARALLEL MOUNTING
SCHLETTER STANDARD
INFORMATION
Description:
- One-layer mounting rack and two cross beams per module row
- Fastens to the U-structure with roof hook, hanger bolts or special fasteners
- Module clamps for framed modules also available with potential equalization
.
Advantages:
- Can be combined with all Schletter’s system components
- Easy mounting process
- Competitively priced
GRIDNORM
INFORMATION
Description:
- Cross rail system for hard-to-reach fastening points
- Accommodates wide spans
- In many cases, a reduction in the number of fastening points is possible
- Dependable adherence to the fastening points
.
Advantages:
- Flexible mounting
- Can be combined with all Schletter’s system components
- Can be assembled using inexpensive standard rails
LAQ07
INFORMATION
Description:
- Horizontal mounting of the modules on shared bearing rails
- Only possible if the cross beams can be placed at any spot
.
Advantages:
- Very few rails are needed
- Optimum module support
- Cost optimization by linear support
FIXING SYSTEMS TILED ROOF
INFORMATION
Description:
- Roof hooks for all common brick types
- Optimized geometries against broken brick
- High quality (VA or aluminum)
- Adjustable height
.
Advantages:
- Can be combined with all Schletter standard profiles
- Fast assembly
- Good value
- Storability
- Fast and easy to plan
FIXING SYSTEMS SHEET METAL ROOF
INFORMATION
Description:
- Fastening solutions for trapezoidal sheet metal and all common sheet metal roofs
- Developed for adaptation to all standard profiles
- Screw connection on the side of the trapezoidal sheets for optimum load transfer into the roofing
- Form-fitting clamping solutions for fastening to metal rebate roofs
- State-of-the-art systems for connection to the substructure
.
Advantages:
- Can be combined with all Schletter standard profiles
- Fast assembly
- Good value
- Storability
- Fast and easy to plan
- Variable use
DOWNLOADS
.
Product sheet BituPlan:
Product sheet FixPlan:
Product sheet Seam clamps:
Product sheet Universal adapter:
Product sheet SingleFix-Vario:
Product sheet ClampFit:
Product sheet SingleFix-V Light mounting kit:
Product sheet EcoRapid:
Component overview:
Checklist parallel to the roof:
SPECIAL FASTENING SOLUTIONS
INFORMATION
Description:
- Due to the diversity of the Schletter fastening systems, applications can be found on almost all roof coverings
- All fastening systems can be combined with Schletter standard profiles
- Hanger bolt solutions for fiber cement roofs
.
Advantages:
- Can be combined with all Schletter standard profiles
- Quick assembly
- Excellent value
- Easy to store
- Fast and easy to plan
- Variable use
ELEVATED MOUNTING
FIXZ-7
INFORMATION
Description:
- Slight elevation on trapezoidal sheet metal for framed modules (elevation angle of 5 – 7°)
- Can be used for all common 60 or 72 cell modules
- Mainly fastened using trapezoidal sheet metal clamps
.
Advantages:
- Quick and easy to mount
- Improved rear-ventilation
- Enhanced self-cleaning
- Optimum load transfer by roof cladding
- Extra yield with favorable system price
FIXZ-15
INFORMATION
Description:
- Elevation on pitched roofs for framed modules (elevation angle of 13 – 15°)
- For horizontal and vertical module mounting
- Available as kits on trapezoidal sheet metal
.
Advantages:
- Quick and easy to mount
- Improved rear-ventilation
- Enhanced self-cleaning
- Higher yields
- Optimum load transfer by roof cladding
- Can be combined with almost all Schletter components